Wagner-Smith Equipment Co.

Protective Grounding Set Tester

Item Number: C403-3220 Category Search Terms , , Brand:

Self-contained, grounding set tester for portable convenience. This tester provides an easy way for an electric utility to check the resistance in protective grounding sets used by line personnel. Powered by 120 VAC, the tester applies Direct Current across the test specimen. Procedure details are given in the instruction manual. All components store in the tester’s integral carrying case. Simple, one-button testing from pushing a single button, the digital display shows the resistance measured in milliohms compared with a preset threshold for the size grounding cable selected (#2, 1/0, 2/0 or 4/0). For system-specific requirements, the user can easily change the Tester’s basis for voltage allowed across a lineworker, which comes factory preset at 50 Volts.

Adjusting this limit automatically causes a corresponding shift in the resistance thresholds for all the grounding cable sizes. Regardless of the voltage-allowed setting or cable size selected, the Tester displays the resistance of each specimen in milliohms with ±1percentage accuracy, from 1 micro-ohm to 6.5 ohms. The utility must establish the maximum resistance allowed for protective grounding sets used on each specific area of its systems. How the utility calculates these values depends on several factors outlined in the Tester instructions. Sample calculations with reference tables and charts are given in the manual. Troubleshooting mode if a ground set does not pass the initial test, the Tester can help isolate the problems. Often, the source of high resistance can be remedied by simple repairs to the cable set. Retesting then can quickly verify the effects of repairs.

  • For this troubleshooting mode, a pair of test probes are furnished to plug into the Tester.
  • A switch activates them instead of the ball-stud terminals.
  • The probes then are used to test across each contact interface in the ground set.
  • The results display in milliohms, just as in the first test mode.
  • Optional terminals for special ground sets are available.
  • The Tester’s standard ball-stud terminals accept most types of ground clamps, including Chance ball-socket clamps.
Item Number C403-3220 Category Product Tags , , Brand:

Recently Viewed

Products not found

inquire about this product

Thank you for your interest in this product.

Please utilize this form for product availability, product specifications or additional information. Someone from our team will be in contact with you.

Name*
Address
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Wagner-Smith Equipment Co.

FREE
VIEW